Trennfix 65 mm x 50 m
Trennfix 10 mm adhesive strip 65 mm x 50 m
For reliable and professional jointing according to DIN 18340
For reliable and professional jointing according to DIN 18340
The paper strip is bonded to the C or U-profiles in the connection area when the substructure is assembled.
Next, the acoustical sealant for acoustic decoupling is applied and the substructure is mounted. The strips are therefore immediately fixed at the correct place.
The gypsum plasterboard panels are mounted with a gap 3 to 4 mm wide or with the working edge mounted against the strips, and then the filler is applied to the gap.
Lastly, the protruding non-adhesive part of the paper strip is cut off.
Application area:
Apply plaster to the Trennfix strip during plastering work.
After the plaster has dried, the protruding strip can be cut off.
- To separate dry walling surfaces of (timber) components
- Separation between dry walling surfaces (sliding separation)
- Separation of plaster surfaces)
Advantages:
As only 10 mm is adhesive, the protruding part of the paper strip can be easily and cleanly cut off after the filler has dried.
Advice:
Rolls also available individually
Store in a dry place and protect from heat
Datasheets(X)
Last viewed
Drilling screws DIN 7504-K, galvanised – tradesperson pack
Lightweight panel anchor, plastic
Penny washer, tolerance DIN 522-A, galvanised
Dia. 3.9 - 5.0 mm drywall screws, single-start thread - tradesperson packs
Drilling screws, DIN 7504-N, galvanised – small packs
Adjustable wooden spacer screw, zinc plated
Carriage bolt, DIN 603, including nut
Drywall screws, single-start thread - dia. 3.6 mm tradesperson packs
Stucco band
Yellow zinc-plated chipboard screws