Stud anchor B, galvanised
Stud anchor B, zinc-plated, clamping thickness 105 mm, ETA approval, M 12 x 200
The perfect anchor for quick, reliable fixings in non-cracked concrete and for suspended ceilings.
The perfect anchor for quick, reliable fixings in non-cracked concrete and for suspended ceilings.
Application area:
For securing supports, beams, metal structures, brackets, cable conduits, mounting rails etc. to non-cracked standard concrete with a strength class of minimum C20/25 and maximum C50/60.
Advantages:
- High permissible loads with low centre and edge distances
- Simple and quick push-through mounting
- Long thread for flexible use with various clamping widths
- Reduced anchorage depths allowed such as with reinforced concrete or reduced loads
Advice:
- * Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
- Tensile load: 2.9–37.2 kN, transverse load: 2.9–37.1 kN
Datasheets(X)
Type description | B 12-105-120/200 |
Anchor diameter x anchor length (l) | 12.0 x 200.0 mm |
Max. attachment height (t fix) | 105 mm |
Max. attachment height reduced (t fix, red) | 120 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 90 mm |
Drill hole depth reduced (h 1, red) | 75 mm |
Embedding depth (h nom) | 82 mm |
Embedding depth (h nom,red) | 67 mm |
Effective anchoring depth (h ef) | 65 mm |
Effective anchoring depth reduced (h ef, red) | 50 mm |
Thread diameter x thread length (metric thread) | 12.0 x 100.0 mm |
Grip thickness | 85 mm |
Width across flats | 19 mm |
Material | Steel |
Surface | Zinc plated |
Material of bracing clip | Stainless steel A2 |
Anchor diameter | 12 mm |
Anchor length (l) | 200 mm |
Thread diameter | 12 mm |
Thread length (metric thread) | 100 mm |
Last viewed
Hexagon head wood screw, DIN 571, galvanised
Hammer drill bit, SDS-Plus
Roofing screw with sealing washer, dia. 15 mm, A2, TX
Yellow zinc-plated chipboard screws
TT countersink drill bit
Joint tape
Masking tape
Drilling screws DIN 7504-N galvanised – tradesperson packs
Insulation retaining plate, plastic
Dia. 3.9 - 5.0 mm drywall screws, single-start thread - tradesperson packs