Stud anchor B, galvanised
Stud anchor B, galvanised, clamping thickness 45 mm, ETA approval, M 8 x 110
The perfect anchor for quick, reliable fixings in non-cracked concrete and for suspended ceilings.
The perfect anchor for quick, reliable fixings in non-cracked concrete and for suspended ceilings.
Application area:
For securing supports, beams, metal structures, brackets, cable conduits, mounting rails etc. to non-cracked standard concrete with a strength class of minimum C20/25 and maximum C50/60.
Advantages:
- High permissible loads with low centre and edge distances
- Simple and quick push-through mounting
- Long thread for flexible use with various clamping widths
- Reduced anchorage depths allowed such as with reinforced concrete or reduced loads
Advice:
- * Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
- Tensile load: 2.9–37.2 kN, transverse load: 2.9–37.1 kN
Datasheets(X)
Type description | B 8-45-54/110 |
Anchor diameter x anchor length (l) | 8.0 x 110.0 mm |
Max. attachment height (t fix) | 45 mm |
Max. attachment height reduced (t fix, red) | 54 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Drill hole depth (h 1) | 65 mm |
Drill hole depth reduced (h 1, red) | 65 mm |
Embedding depth (h nom) | 56 mm |
Embedding depth (h nom,red) | 47 mm |
Effective anchoring depth (h ef) | 44 mm |
Effective anchoring depth reduced (h ef, red) | 42 mm |
Thread diameter x thread length (metric thread) | 8.0 x 75.0 mm |
Grip thickness | 60 mm |
Width across flats | 13 mm |
Material | Steel |
Surface | Zinc plated |
Material of bracing clip | Stainless steel A2 |
Anchor diameter | 8 mm |
Anchor length (l) | 110 mm |
Thread diameter | 8 mm |
Thread length (metric thread) | 75 mm |
Last viewed
Drilling screw with large washer head, dia. 11 mm
Insulation anchor with plastic nail
Roofing screw with sealing washer, dia. 15 mm, A2, TX
Drywall screws, single-start thread - dia. 3.6 mm tradesperson packs
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
ACP decking screw, A2 with TX drive
Cavity anchor, metal
Penny washer, tolerance DIN 522-A, galvanised
Adhesive tape, aluminised
Stud anchor B, galvanised