Adjustable wooden spacer screw, zinc plated
Spacer screw, adj., countersunk head with milled ribs, steel, galv., 6 x 145/60
Countersunk head with milling ribs, TX drive
Art.-no.
62256 145
EAN 4029484183623
Prices for customers after login
Exclusively for distributors
Countersunk head with milling ribs, TX drive
Countersunk head with milling ribs, TX drive
Application area:
For making changes to the spacing of wood substructures in masonry and wood.
Field of Application:
Wall and ceiling panels in interior construction.
Advantages:
- Quick mounting as it is not necessary to underlay battens.
- Easy to equalise spaces by unscrewing using a screwdriver or power screwdriver.
- No pre-drilling in wood thanks to solid grooved part (edge distance 15 mm).
- For use with multi-purpose wall plugs without collar (art. no. 6101 ...) in all masonry.
- Milling ribs ensure clean sinking of the head.
Advice:
The screw is screwed into the fixing base (wooden beam) through the support batten so that the screw is recessed into the support beam. The support battens can then be adjusted by rotating in the opposite direction.
Pre-drilling is recommended, in particular for dried battens.
When selecting the screw length, keep in mind that the thread must be fully anchored into the surface.
Product information
Datasheets(X)
Last viewed
Yellow zinc-plated chipboard screws
Abrasive mesh
Turbo screw with TX drive
Drywall screws with Teks drill tip - tradesperson packs
Carriage bolt, DIN 603, including nut
PREMIUM adhesive masking tape
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Cavity anchor, metal
Masking tape
Drilling screw with large washer head, dia. 11 mm