TT countersink drill bit
TT countersink drill bit, 4.00 mm
Countersink drill bit with moveable depth stop, incl. Allen key.
Countersink drill bit with moveable depth stop, incl. Allen key.
Advantages:
- The TT countersink drill bit is equipped with a Ø 4.0 mm drill bit, a Ø 9.4 mm countersink and a depth stop.
- The drill bit and depth stop can be continuously adjusted.
- No special drill bit required. The TT countersink drill bit enables precise pre-drilling and countersinking in one step with a clear view of the working surface.
- No burn marks appear in the wood thanks to the moveable depth stop.
Advice:
Degrease the TT countersink drill bit prior to first use.
The Allen key can be used to set the drilling and countersinking depth or change the drill bit.
The TT countersink drill bit should be operated at approx. 1,300 rpm.
If necessary, use acid-free penetrating oil with PTFE to lightly lubricate between the plastic depth stop and aluminium height adjustment.
The drill bit can be changed easily (twist wood drill bit or DIN 338, 4.0 mm).
Diameter of countersink: up to 12.0 mm
Datasheets(X)
Last viewed
ACP decking screw, A2 with TX drive
Particle board screws A2
PanelFix timber screw with washer head, cutting notch, zinc-plated steel, with ETA-11/0389 approval
Drilling screws DIN 7504-K, galvanised – tradesperson pack
Drywall screws, double-start thread – dia. 3.9 mm collated
PanelFix timber screw with washer head, cutting notch, zinc-plated steel, with ETA-11/0389 approval
Roofing screw with sealing washer, dia. 15 mm, A2, TX
Dual tape, soft PVC
Drywall screws with Teks drill tip – collated
Drywall screws for fibreboard with HiLo thread - tradesperson packs