Nail sleeve
Spring steel nail sleeve, zn/pl., min. setting depth in concrete: 30 mm, 6 x 80
Extremely quick and easy installation: Drill hole – hammer in nail sleeve – job done!
Extremely quick and easy installation: Drill hole – hammer in nail sleeve – job done!
Application area:
For securing window frames, lath substructures, sheet metal profiles and insulating material to concrete, solid stone and compression-proof natural stone.
Field of Application:
- For securing window frames, lath substructures, sheet metal profiles and insulating material to concrete, solid stone and compression-proof natural stone.
- Main users: joiners, roofers, façade builders, ceiling installers
Advantages:
- Quick and easy installation
- PSH beading DIN 50979
- More resistant to temperature than nylon anchors
Advice:
- The component is held in place by the collar
- Embedment depth = Minimum setting depth in concrete
- Sleeve diameter unclamped: 6.8 mm
- When combined with metal discs, the ACP nail sleeve with 8 mm diameter is suitable for installing insulation
Anchor diameter x anchor length (l) | 6.0 x 80.0 mm |
Nominal drill hole diameter | 6.0 mm |
Diameter | 6.8 mm |
Embedding depth | 30.0 mm |
Material | Spring steel |
Surface | Zinc plated |
Anchor diameter | 6.0 mm |
Anchor length (l) | 80.0 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Adjustable wooden spacer screw, zinc plated
Dia. 3.6 mm drywall screws, double-start thread - tradesperson packs
Bits, 1/4"
B2 partition wall tape
Drywall screws, single-start thread – dia. 3.9 mm collated
Dia. 3.9 - 5.0 mm drywall screws, single-start thread - tradesperson packs
PanelFix timber screw with washer head, cutting notch, zinc-plated steel, with ETA-11/0389 approval
Bits, 1/4"
Drywall screws with Teks drill tip - tradesperson packs
Galvanised steel nail with countersunk head
