Drywall screws with Teks drill tip, special length - tradesperson packs
Drywall screw EN 14566, class 48, TSD, drill tip, 4.2 x 75
EN 14566, class 48, TSD
EN 14566, class 48, TSD
Application area:
For mounting plasterboard onto substructures consisting of sheet steel profiles up to 2.00 mm thick.
Field of Application:
For mounting double-panelled solid building panels onto metal profiles up to 2.0 mm thick.
Advantages:
The drill tip allows simple screwing in without pre-drilling.
Advice:
Material class A1, i.e. drywall screws are non-flammable.
Pull-out resistance 450 N on metal profiles in accordance with EN 14195 (0.60 ± 0.04 mm) or wood in accordance with EN 338, class C 16.
Datasheets(X)
 | |
Diameter | 4.2 mm |
Length | 75.0 mm |
Thread length | 49.0 mm |
Internal drive | H2 |
Head diameter | 8.5 mm |
EN standard | 14566 |
Material | Steel, case-hardened |
Surface | Phosphated |
Price unit | per 100 items |
Last viewed
Drywall screws with flat head, single-start thread - small packs
B2 partition wall tape
Particle board screws A2
Drilling screws DIN 7504-N galvanised – tradesperson packs
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Roofing nails, hot-dip galvanised – 1.0 kg box
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Drilling screws, DIN 7504-N, galvanised – small packs
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Galvanised steel nail with washer head