Drywall screws, double-start thread – C4 surface coating
C4 coating, 1000 SST drywall screw EN 14566, 3.9 x 25
EN 14566, class 48, TMN
EN 14566, class 48, TMN
C4 coating (1000 SST)
Application area:
Double-start thread drywall screws are used for mounting plasterboard onto substructures consisting of sheet steel profiles up to a thickness of 0.6 mm.
Field of Application:
For wet rooms.
Advice:
With PH 2 bit in pack.
When processing, ensure that the coating is not damaged.
Material class A1, i.e. drywall screws are non-flammable.
Pull-out resistance 450 N on metal profiles in accordance with EN 14195 (0.60 ± 0.04 mm) or wood in accordance with EN 338, class C 16.
Datasheets(X)
 | |
Diameter | 3.9 mm |
Length | 25.0 mm |
Thread length | 18.0 mm |
Internal drive | H2 |
Head diameter | 8.5 mm |
EN standard | 14566 |
Material | Steel, case-hardened |
Surface | Zinc nickel |
Last viewed
Particle board screws A2
Drilling screws, DIN 7504-N, galvanised – small packs
Hexagon head wood screw, DIN 571, galvanised
Drilling screws DIN 7504-N galvanised – tradesperson packs
Plastering borders
Blank washers, DIN 440 R, galvanised
Dia. 3.6 mm drywall screws, double-start thread - tradesperson packs
Drywall screws with Teks drill tip - tradesperson packs
PanelFix timber screw with washer head, cutting notch, zinc-plated steel, with ETA-11/0389 approval
Washers, DIN 9021, galvanised