Dia. 3.9-5.0 mm drywall screws, double-start thread - small packs
Drywall screw EN 14566, class 48, TMN, double-start thread, 3.9 x 55
EN 14566, class 48, TMN
EN 14566, class 48, TMN
Application area:
Double-start thread drywall screws are used for mounting plasterboard onto substructures consisting of sheet steel profiles up to a thickness of 0.6 mm.
Advantages:
They can be easily screwed into the metal profile without pre-drilling through the plasterboard.
Advice:
Only one screw-in tool (PH 2 recessed head bit) is required for all the dimensions listed.
Material class A1, i.e. drywall screws are non-flammable.
Pull-out resistance 450 N on metal profiles in accordance with EN 14195 (0.60 ± 0.04 mm) or wood in accordance with EN 338, class C 16.
Datasheets(X)
Diameter | 3.9 mm |
Length | 55 mm |
Thread length | 35 mm |
Head diameter | 8.5 mm |
Internal drive | H2 |
EN standard | 14566 |
Material | Steel, case-hardened |
Surface | Phosphated |
Price unit | per 100 items |
Last viewed
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Particle board screws A2
Hexagon nut DIN 934 strength class 8, zinc-plated - small packs
Drywall screws for fibreboard with HiLo thread – collated
Galvanised steel nail with washer head
B1 partition wall tape
Roofing screw with sealing washer, dia. 15 mm, A2, TX
Hexagon head wood screw, DIN 571, galvanised
Left-cutting sheet metal shears