Dia. 3.6 mm drywall screws, double-start thread - tradesperson packs
Drywall screw EN 14566, class 48, TMN, double-start thread, 3.6 x 35
EN 14566, class 48, TMN
EN 14566, class 48, TMN
Application area:
Double-start thread drywall screws are used for mounting plasterboard onto substructures consisting of sheet steel profiles up to a thickness of 0.6 mm.
Advantages:
They can be easily screwed into the metal profile without pre-drilling through the plasterboard.
Advice:
Only one screw-in tool (PH 2 cross recess bit) is required for all the dimensions listed.
Material class A1, i.e. drywall screws are non-flammable.
Pull-out resistance 450 N on metal profiles in accordance with EN 14195 (0.60 ± 0.04 mm) or wood in accordance with EN 338, class C 16.
Datasheets(X)
Last viewed
Masking tape
Masking tape
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
Cavity anchor, metal
Bits, 1/4"
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
PanelFix timber screws with countersunk milling head, cutting notch, zinc-plated steel, with ETA-11/0389 approval from dia. 3.5 mm
PanelFix timber screw with washer head, cutting notch, zinc-plated steel, with ETA-11/0389 approval
Stud anchor B, galvanised
Particle board screws A2